Ga veilig onderweg met onze fietsverlichting accessoires. Reflectoren, houders, kabels en powerbanks; bij CUBE Stores vind je alles om gezien te worden.Â
StVZO (German road traffic regulations) approvedZ-approval markcarrier mount with bolts and nuts (50 mm hole spacing)The ACID Carrier Reflector SLIM STANDARD complies with German road traffic regulations (StVZO), carries the Z-approval mark and has an extremely compact design. It bolts quickly and easily to luggage carriers with mounts with 50 mm hole spacing.SpecificationsColour: redMaterial: plastic, steelSize: (BxHxD) 78 x 19 x 7 mm
For helmets with x-lock mountIncl. cr 2023 3v lithium battery2 light modesProtection class ip44The new CUBE Helmet Rear Light is slightly Larger than its predecessor. It fits all X-Lock helmets and simply twists on and off for quick and easy attachment and removal. There's a flashing mode to save battery power, and the button cell battery swaps out in seconds. With its stylish square design, this mini light is the perfect complement to the new generation of helmet styles. And we also made it splashproof, because that's how we roll.
E-Bike mudguard rear light with 4 LEDsStVZO (German road traffic regulations) approvedcompatible with ACID mudguards with suitable stay adapter130 cm light cable with the BES 3 plug for BOSCH drive unitinput voltage 12 V (DC)protection class IP44A bright, reliable rear light is a safety essential in traffic! The ACID E-Bike Mudguard Rear Light PRO-E integrates cleanly with compatible ACID mudguards and replaces the stay adapter. Maximum visibility comes courtesy of four powerful LEDs wrapped up in a German road traffic regulation-approved unit. Includes 130 cm light cable and the BES 3 connector for Bosch drive units.SpecificationsColour: blackMaterial: plasticWeight: 34 g
The ACID X-Connect front light cable is designed to easily integrate any new ACID headlight with your CUBE e-bike. Routing through your e-bike's headset to preserve the clean looks of your e-bike, it uses the X-Connect standard to draw power for your ACID front light directly from your e-bike's battery. With an IPX7 waterproof connection to the light and a 1300mm length for compatibility with a wide range of CUBE e-bikes, you can be sure of reliable performance in any weather conditions.
StVZO (German road traffic regulations) approvedZ-approval markeasy clip-on installationfits ACID carriers with 50 mm hole spacing in the cross railThe ACID Carrier Reflector SLIM CLIP complies with German road traffic regulations (StVZO), carries the Z-approval mark and has an extremely compact design. It clips quickly and easily to the cross rail on compatible ACID carriers with 50 mm hole spacing.SpecificationsColour: redMaterial: plasticSize: (BxHxD) 78 x 19 x 6 mm
StVZO (German road traffic regulation) approved72 pieces360° visibilityfast and easy assemblysuitable for 1.8 - 2 mm diameterCompliant with German StVZO traffic legislation. Enhanced 360° visibility of the biker via circular wheel reflection from all directions when illuminated. You'll be seen from all angles as the reflectors throw back light in all directions. The reflectors use a coating of aluminum on microscopic glass balls with fine and aesthetical design and fit nearly all spoke sizes and forms. They have no negative impact as the wheels still run perfectly true.SpecificationsColour: silverMaterial: plasticSize: (DxL) 5 x 80 mm (1 unit)Weight: 73 g
Front light extension cable X-Connect
Cable length 15 cm; protection class IPX7
150 mm incl. connectors
The X-Connect extension cable for ACID front lights enables the connecting the headlight to X-Connect ports on e-bikes or outdoor lights. With a length of 15 cm, it is compatible and complements the connection to a variety of CUBE e-bikes. Thanks to IPX7 certification, safety is always guaranteed even in the most adverse weather conditions.
E-Bike carrier rear light with consistant COB lightstib
4 LEDs with adaptive brake-funktion
StVZO (German road traffic regulations) approved
1400 mm Bosch BES3 Cable
Input voltage 12 V (DC)
Protection class IP56
A bright, reliable rear light is a safety essential in traffic! The ACID PRO-E HPP rear carrier light for e-bikes has a plastic housing that clips on to compatible ACID carriers with round stays. Or convert it for use on any standard carrier with 50 mm hole spacing courtesy of the replaceable mounting plate. COB light strips and four powerful brake light LEDs guarantee excellent visibility to improve safety in road traffic. Complies with German road traffic regulations (StVZO), and includes a 140 cm light cable and connector for Bosch BES3 drive units.
e-bike front light power cablecompatible with BOSCH motors (BES2)1400 mm cable lengthA 140 cm front light power cable with BOSCH drive unit connector (BES2).SpecificationsColour: blackMaterial: 0
Mounted with just one screw, the ACIC FLPlink Adapter Universal is the straightforward way to attach any new ACID front light to a CUBE or ACID FPILink stem Faceplate. It not only fits seamlessly and centrally on the handlebar, but also keeps the space free for other accessories. And, as well as being compatible with ACID e-bike and dynamo lights, it can also be used with any GoPro-compatible accessory.
compatible with CUBE Kathmandu Hybrid EXC 750SL 750SLT 750 and CUBE Kathmandu Classic from 2022 model year onwards0SpecificationsColour: redMaterial: plasticSize: (BxHxD) 78 x 19 x 6 mm
Handlebar bracket for ACID e-bike front lightSuitable for ACID pro-e 60 CMPT and ACID pro-e 50 CMPTSuitable handlebar diameters: 31.8 and 35 mmThe ACID Handlebar Mount Center is compatible with all standard front lights, including the ACID PRO-E 60 CMPT and ACID PRO-D 50 CMPT. It mounts sideways so the light sits centrally over the stem, and is compatible with handlebar diameters of 31.8 to 35 mm.
Featuring a super-easy clip-on system and a tool-less accessory mount, the ACID FPILink Adapter Universal Clip is the straightforward way to attach any new ACID front light to a CUBE or ACID FPILink stem Faceplate. Because it's so quick to use, it can easily be transferred between bikes. And, as well as being compatible with ACID e-bike and dynamo lights, it can also be used with any GoPro-compatible accessory.
The ACID Handlebar Mount PRO-E is compatible with the new ACID front lights, including the ACID PRO-E 150 and ACID PRO-D 200 HB. It mounts sideways so the light sits centrally over the stem, and is compatible with handlebar diameters of 31.8 to 35 mm.
e-bike rear light power cablecompatible with BOSCH motors (BES2)1400 mm cable lengthA 140 cm rear light power cable with BOSCH drive unit connector (BES2).SpecificationsColour: blackMaterial: 0
Compliant with German StVZO traffic legislation. Enhanced 360° visibility of the biker via circular wheel reflection from all directions when illuminated. You'll be seen from all angles as the reflectors throw back light in all directions. The reflectors use a coating of aluminum on microscopic glass balls with fine and aesthetical design and fit nearly all spoke sizes and forms. They have no negative impact as the wheels still run perfectly true.
Handlebar bracket for ACID e-bike front light
suitable for ACID PRO-E 110 and ACID PRO-E 140 High Beam
Suitable handlebar diameters: 31.8 and 35 mm
Specifications
Material: plastic
Adapter for attaching a ACID E-Bike headlight to the HIC front carrier 93730. Supplied with a short X-Connect cable and mounting materials.
For easy installation of the:
ACID E-BIKE FRONT LIGHT PRO-E 150 X-CONNECT
ACID E-BIKE FRONT LIGHT PRO-E 200 HB X-CONNECT
