NEWMEN has developed this inner tube with Tubolito for all NEWMEN STREEM wheels.
It is compatible with the internal STREEM Aero valve system, but can also be ridden with a conventional valve thanks to the NEWMEN Streem Aero Valve Kit.
To inflate the Tubolito you need the NEWMEN Streem Aero Valve Kit 90348 which includes a Presta valve adapter/extender.
NEWMEN Streem Aero
The revolutionary NEWMEN Streem Aero system hides the valve completely in the rim and ensures better aerodynamics and a clean look.
TUBOLITO TUBO ROAD INNER TUBE
At just 40 grams, Tubo Road offers up to 70 % weight savings compared to a standard inner tube. In a race, this can be decisive when valuable seconds are at stake. Tubolito combines a new high-tech material with a specially developed seamless production technology. Tubolito Light Weight tubes can withstand up to twice the force of standard tubes. They are also twice as elastic, durable, UV-resistant and retain air for a very long time, guaranteeing you maximum drop-out protection. The Tubo Road is suitable for disc and rim brakes. How much pressure can be pumped into Tubolitos depends on the tire used. Therefore, please observe and comply with the information on the casing. However, it is important to note that Tubolitos should not be inflated to more than 0.5 bar outside the tire, otherwise they will deform and become defective!
Note: Together with the NEWMEN Streem Aero Valve Kit, the tube can be used "normally".
SPECIFICATIONS
Material: High-tech thermoplastic
Area of application: Road bike, triathlon, time trial
Compatibility: NEWMEN wheels
Compatible sizes (inch): 28x0.7 to 28x1.25
Compatible sizes (ETRTO): 18-622 to 32-622
Valve length: 19 mm
Valve standard: AV (Schrader)
Color: orange
Weight: 43g
The use of sealing milk is not considered by the manufacturer, as the wall of the tubes is too smooth and the chemical composition of the tube does not allow a sealant!
brake shoe for V-brakeslength 70 mmBrake shoe for V-brakes. Made with CUBE's rubber compound for optimum braking performance.SpecificationsColour: blackMaterial: rubberWeight: 78 g
The revolutionary NEWMEN Streem Aero Tubeless Kit hides the valve completely in the rim and ensures better aerodynamics and a clean look. For pumping and deflating, the valve extension provided is simply screwed on by hand. Thanks to the adapters supplied, the hybrid system can also be used with conventional valves. In the event of a defect, a tube can also be pulled in.
Note: The tubeless kit is only compatible with NEWMEN Streem Aero wheels.
An additional NEWMEN Schrader tubeless valve 24mm is required to equip a second wheel.
SPECIFICATIONS:
Material: Aluminum, plastic
Compatibility: Newmen Streem Aero wheels (all profile heights; to equip a wheel)
Valve type: AV Internal-Schrader, SV Presta valve extension
Length: 24 mm (internal valve)
Colour: Black
Weight weighed: 4g (assembled kit without valve extension)
IN THE BOX:
1x Valve tool
1x Schrader tubeless valve 24 mm (for one wheel only!)
2x Valve nut
1x Presta valve extension
2x Replacement sealing rings
2x Cover caps
2x Reducer cap
Shift cable set for Shimano/SRAM/Campagnolo, Slick Lube Liner for extremely low friction, universal, contents: 9 x Sealed End Caps, 6 x Cable Donuts, 1 x Hooded Aluminium End Cap, 2 x 3G Tube Tops, 2 x Cable Tips
soft mixminimises noise generation on noise-prone brake systemsideal for amateur and beginner cyclistsAbrasive substances used for 'organic' brake pads are usually made from fibres obtained from glass, rubber, carbon/Kevlar® or Twaron® combined with fillers and temperature-resistant synthetic or natural resin. These brake pads have a reputation for being softer and quieter, but they also have a reputation for being fast-wearing and creating more brake dust. They also tend to rub more after exposure to high temperatures. Designed for amateur and beginner cyclists.SpecificationsColour: blueMaterial: organicWeight: 33 g
replacement pad for two-piece brake shoe ROADlength 55 mmReplacement pads for the two-piece ROAD brake shoe.SpecificationsColour: blackMaterial: rubberWeight: 21 g
Abrasive substances of the 'organic' category consist of fibres, which can be gained from glas, rubber, carbon or Kevlar® and Twaron®. Furthermore, they consist of fillers and temperature-resistant synthetic or natural resin. These coverings are said to be softer, quieter, but they also have the reputation of fast wear and brake dust development. On top of that, especially after increased temperature levels, they develop a worse reaming performance. They are designed for the hobby and entry-level field.Features:soft mix, minimizes disturbing noise generation on vulnerable brake systems, brake force builds up more slowly, ideally suitable for the hobby and entry-level field, faster wear than with sintered coating
soft mixminimises noise generation on noise-prone brake systemsideal for amateur and beginner cyclistsAbrasive substances used for 'organic' brake pads are usually made from fibres obtained from glass, rubber, carbon/Kevlar® or Twaron® combined with fillers and temperature-resistant synthetic or natural resin. These brake pads have a reputation for being softer and quieter, but they also have a reputation for being fast-wearing and creating more brake dust. They also tend to rub more after exposure to high temperatures. Designed for amateur and beginner cyclists.SpecificationsColour: blueMaterial: organicWeight: 33 g
good hot braking characteristicsbraking force builds up quicklyideal for freeride/downhill usefaststrong brakingpowerfulThese brake pads have a reputation for offering longer durability and good hot braking characteristics but increase wear on the brake disc and are prone to noise generation. For downhill or freeride use.SpecificationsColour: redMaterial: sinteredWeight: 33 g
good hot braking characteristicsbraking force builds up quicklyideal for freeride/downhill usefaststrong brakingpowerfulThese brake pads have a reputation for offering longer durability and good hot braking characteristics but increase wear on the brake disc and are prone to noise generation. For downhill or freeride use.SpecificationsColour: redMaterial: sinteredWeight: 33 g
Abrasive substances of the 'organic' category consist of fibres, which can be gained from glas, rubber, carbon or Kevlar® and Twaron®. Furthermore, they consist of fillers and temperature-resistant synthetic or natural resin. These coverings are said to be softer, quieter, but they also have the reputation of fast wear and brake dust development. On top of that, especially after increased temperature levels, they develop a worse reaming performance. They are designed for the hobby and entry-level field.Features:soft mix, minimizes disturbing noise generation on vulnerable brake systems, brake force builds up more slowly, ideally suitable for the hobby and entry-level field, faster wear than with sintered coating
