Nf ergonomics philosophy applied to maximise control even during extreme ridesRelief zone to prevent irritation of the thumb jointTraction zone underneath for increased gripClamp at inner endHigh-end cold-forged aluminium clampACID gilink interface for tools and other accessoriesSuperior performance courtesy of intelligent ergonomics: the smart surface design of the ACID ICON PRO grips delivers maximum control on extreme runs from start to finish. The ACID logo structure on the upper stops your hands from slipping off even on action-filled rides. A smooth Relief Zone on the underside helps reduce chafing on the sensitive thumb joint, while the Traction Zone lets your fingertips really dig in for maximum grip. Another practical highlight is the ACID GILink that allows you to mount accessories like a multi-tool inside the handlebars.
Crank arm length 160-175 mmCompatible with bosch gen3 bni spindle interfaceOur crank is the most important component of your drivetrain. Not only does the low-profile design look great on modern bike designs, it also makes the crank incredibly stiff. With every last watt efficiently translated into forward motion, it could be the tyre-width‘s advantage you need in the final sprint.
Easy installationControlled flexEasy adjustmentSafe clamping mechanism for carbon saddle railsFull-carbon seat post constructed from UD carbon fibre. Our top priority when designing this seat post was to incorporate flex for maximum comfort into a highly reliable, simple piece of technology. But maximum flex isn't everything. Seat posts with too much flex have two crucial disadvantages: 1. High cadences cause the rider to start bouncing 2. The lack of damping delivers an uncomfortable kickback when riding over obstacles seated. So some flex is good, but it must be controlled. And because we want to make biker's lives that little bit easier, we paid attention to the smallest details. Like using EPDM O-rings to prevent the threaded inserts in the upper clamp from falling out when loosening the bolts.
Easy installationControlled flexEasy adjustmentSafe clamping mechanism for carbon saddle railsFull-carbon seat post constructed from UD carbon fibre. Our top priority when designing this seat post was to incorporate flex for maximum comfort into a highly reliable, simple piece of technology. But maximum flex isn't everything. Seat posts with too much flex have two crucial disadvantages: 1. High cadences cause the rider to start bouncing 2. The lack of damping delivers an uncomfortable kickback when riding over obstacles seated. So some flex is good, but it must be controlled. And because we want to make biker's lives that little bit easier, we paid attention to the smallest details. Like using EPDM O-rings to prevent the threaded inserts in the upper clamp from falling out when loosening the bolts.
suitable for mountain bikesvibration-damping materialcomfortable anti-slip surfaceultralightTake control. Our foam grips are made from an ultra light, vibration damping material that's particularly suited for use on MTBs.SpecificationsColour: blueMaterial: EVA-FoamSize: (DxL) 27 x 126 mmWeight: 58 g
Weight 29" 945g
Weight 29" Beskar 30 DH set: 2250g (Base front/Strong rear)
Inner width 30mm
Outer width 33mm
Height 18,8mm
To achieve the best possible weight and strength at specific price points, we have optimized our wheel configurations for different disciplines by using different weight variants of our rims for front and rear wheels. The spoke selection is also optimized for front/rear and each discipline - down to the number of spokes.
High-end Beskar aluminum rim with maximum dent resistance and minimum weight
Ideal support for modern 2.3" to 2.6" MTB tires
wider tires (and rims) do not make sense in our eyes, because then too little pressure is required to maintain comfort. This results in a mushy ride.
Proven and very light 28h FADE MTB hub
Compatible with 15x110mm and 20x110mm Boost forks thanks to interchangeable end caps
Rim with black shotpeen finish
Discreet laser/sticker artwork
32 Sapim 2.0-1.65-2.0 spokes
Significantly outperforms the stability of its predecessor NEWMEN Evolution SL E.G.30
More resistant in terms of impact resistance than all competitor products tested in our test lab (we really did test a lot of competitor products)
This makes it the perfect rear rim for ambitious enduro racers and for use on the front wheel of World Cup downhill teams
Shallow rim profile for optimized comfort and grip
Tubeless ready with hook
Max. 180kg system weightFINEST ALUMINUM WITHOUT COMPROMISE
Our Beskar wheels leave no wish unfulfilled. With their welded joints, high performance spokes and an unrivaled dent resistance, these wheels are ready to take on any terrain. Thanks to four different rim versions, there is the perfect Beskar wheel for every riding style. From lightweight XC to nearly indestructible DH wheels, the Beskar family is ready for everything. By using only the best materials, our proven Fade hub and a meticulously developed rim design, we were able to create the perfect balance between weight, durability and comfort for a fair price.
No matter if you want to fully send it on rough DH tracks, take your Trailbike down some loamy trails or go for a bikepacking trip on your hardtail - the Beskar wheels have your back.
All Beskar wheels are approved for E-Bike use, they can take it with ease. The rim tape is fitted and a tubeless kit is included in the box - ready to go!
THE RIM
6069 aluminium for the win!
On our quest to develop the perfect rim shape, we conducted impact tests and FEM analyses on over 30 different rim profile prototypes. This resulted in the rim profile we now use on all MTB wheels.
The 30 millimeter wide aluminium Beskar rims with their flat profile achieved the best impact resistance values in their weight classes on the test bench - both in comparison to the predecessor and the competition.
The combination of the thought through rim profile, a welded joint, and the finest aluminum results in a highly durable and yet lightweight rim that doesn´t shy away from any challenge.
We follow the principle low weight in the front, high durability in the back. This is why we developed four versions of the Beskar rim: light, base, strong and DH. While the rim profile.
THE SPOKES
High-end wheels, high-end spokes.
Of course we have selected only the best spokes for our finest aluminum wheels.
Depending on the intended use, either 28 or 32 high-end Sapim spokes connect rim and hub. To give you the perfect balance between weight, durability and comfort, not only the spoke count, but also the thickness varies.
Reliable, light and, if needed, easy to service or replace. These are spokes you don´t need to worry about.
THE HUB
Reliable, light and silent.
Three pawls, a newly designed tooth profile and the large diameter of the freewheel are working perfectly together to give you a smooth and silent ride.
More material at the critical points enhances security and durability. We are so convinced of our new FADE hub generation that we have approved all FADE MTB hubs for E-MTB use without exception.
LIGHT AND TOUGH: OUR PHASE 30 WHEELS
Open the curtains for our Phase wheels! These high-end carbon wheels mean serious business and allow you to squeeze every last bit of performance out of every ride. They are constructed to be as light
as possible while still tough enough to take a beating. With only 1.160g per set, our Phase XC CS wheels have set a new benchmark.
From super light weight XC to seriously tough enduro usage, the Phase wheels take every challenge with ease and will catapult you agilely over the trails.
Like all our wheels, the Phase wheels are approved for e-bike use without restrictions. The rim tape is fitted and a tubeless kit is included in the box - ready to go!
THE RIM
The best carbon rims we have ever built.
A modern inner width of 30mm, super impact-resistant outer shape and an highly sophisticated carbon layup. Thanks to the flat rim profile, these hookless rims generate a ton of grip when combined with modern MTB tires.
We believe, that there is the perfect wheel for every riding style and follow the concept,low weight in the front, high durability in the back. This is why we have developed three versions of the Phase rim: light, base and strong. While the rim profile stays
the same, the wall thickness changes. For example, if you are giving it all on rough endurotracks, we would recommend a Phase base front wheel combined with a Phase strong back wheel.
As with all our NEWMEN carbon rims, we also grant a lifetime 50% crash replacement on the Phase 30 Lineup - even for second or third owners.
THE SPOKES
CS or classic steel? With Phase wheels you get to choose.
Yepp, you can get these wheels with CS spokes. It doesn´t get much lighter: 2,8g per spoke.
In total, we are able to save 40% weight while being 30% stiffer compared to conventionalspokes. This allows us to build the Phase wheels with only 24 spokes, creating the perfect balance between stiffness and comfort. At the same time, CS spokes are just as easy to replace and service as conventional spokes.
As impressive as the CS spokes are, of course we have only selected the best steel spokes for our Phase wheels. Using high-end Sapim spokes in different diameters according to the intended use. These are spokes are spokes you can rely on.
THE HUB
Reliable, light and silent.Three pawls, a newly designed tooth profile and the large diameter of the freewheel are working perfectly together to give you a smooth and silent ride.
More material at the critical points enhances security and durability. We are so convinced of our new FADE hub generation that we have approved all FADE MTB hubs for E-MTB use without exception.
If you choose CS spokes in your Phase wheels, you will have our Fade CS hub at the center of your wheel. This hub is adapted to work perfectly with the carbon spokes.
We were able to reduce the weight of the hub body even further while using the same, proven technology inside the hub.
LIGHT AND TOUGH: OUR PHASE 30 WHEELS
Open the curtains for our Phase wheels! These high-end carbon wheels mean serious business and allow you to squeeze every last bit of performance out of every ride. They are constructed to be as light
as possible while still tough enough to take a beating. With only 1.160g per set, our Phase XC CS wheels have set a new benchmark.
From super light weight XC to seriously tough enduro usage, the Phase wheels take every challenge with ease and will catapult you agilely over the trails.
Like all our wheels, the Phase wheels are approved for e-bike use without restrictions. The rim tape is fitted and a tubeless kit is included in the box - ready to go!
THE RIM
The best carbon rims we have ever built.
A modern inner width of 30mm, super impact-resistant outer shape and an highly sophisticated carbon layup. Thanks to the flat rim profile, these hookless rims generate a ton of grip when combined with modern MTB tires.
We believe, that there is the perfect wheel for every riding style and follow the concept,low weight in the front, high durability in the back. This is why we have developed three versions of the Phase rim: light, base and strong. While the rim profile stays
the same, the wall thickness changes. For example, if you are giving it all on rough endurotracks, we would recommend a Phase base front wheel combined with a Phase strong back wheel.
As with all our NEWMEN carbon rims, we also grant a lifetime 50% crash replacement on the Phase 30 Lineup - even for second or third owners.
THE SPOKES
CS or classic steel? With Phase wheels you get to choose.
Yepp, you can get these wheels with CS spokes. It doesn´t get much lighter: 2,8g per spoke.
In total, we are able to save 40% weight while being 30% stiffer compared to conventionalspokes. This allows us to build the Phase wheels with only 24 spokes, creating the perfect balance between stiffness and comfort. At the same time, CS spokes are just as easy to replace and service as conventional spokes.
As impressive as the CS spokes are, of course we have only selected the best steel spokes for our Phase wheels. Using high-end Sapim spokes in different diameters according to the intended use. These are spokes are spokes you can rely on.
THE HUB
Reliable, light and silent.Three pawls, a newly designed tooth profile and the large diameter of the freewheel are working perfectly together to give you a smooth and silent ride.
More material at the critical points enhances security and durability. We are so convinced of our new FADE hub generation that we have approved all FADE MTB hubs for E-MTB use without exception.
If you choose CS spokes in your Phase wheels, you will have our Fade CS hub at the center of your wheel. This hub is adapted to work perfectly with the carbon spokes.
We were able to reduce the weight of the hub body even further while using the same, proven technology inside the hub.
The steplessly adjustable telescopic seat post PRO 2.0 'Inside' is especially suitable for frames with inside attachment. All CUBE Stealth Ready frames are compatible. The adjustment range of 130 mm can be operated with the remote control at the cockpit. Both hands stay on the bar and offer maximum driving safety thanks to the remote control. Maximum recommended weight is 110 kg.
DE ALLROUNDER VOOR SNELHEID EN CONTROLE. De G-ONE R PRO is de perfecte tire voor rijders die een verscheidenheid aan terrein willen rijden. Of het nu op bospaden, offroad-trails of asfalt is, de G-ONE R PRO biedt een balans tussen snelheid en controle. Dankzij zijn boomerang-profiel en de schuin geplaatste zijknoppen biedt hij ook bij natte omstandigheden veel grip. Dit maakt hem een veilige keuze voor onbekend terrein.
DE REVOLUTIE VOOR DE E-MTB. Onze eerste echte E-MTB specialist voor All Mountain en Enduro. Hij maakt ook uphill compromisloos rijden mogelijk, kan sterke versnellingen aan, maar ook technisch rijden op trails. Zijn massieve voorkomen dankt hij aan de stabiele noppen, meer rubber en de grote breedtes.
Door de motocross geïnspireert profiel met massieve, stabiele noppen, zowel in het centrum als op het schouderbereik, voor betrouwbaar rijgedragkorte V-Grooves in de centrum en schoudernoppen voor direct en precies rijgedragspeciaal aangepast ontwerp voor het voor- en achterwiel (Front en Rear).VoorBetrouwbare grip in de bochten, gecombineerd met hoge remtractiegoede transmissie van stuurcorrecties door lange gripkanten, zelfs wanneer er uphill weinig gewicht op het voorwiel rust. Het gevolg: minder/controleerbaar onderstuur.AchterMaximale aandrijfs- en remtractie door massieve noppen, die ook beide steile beklimmingen genoeg kracht op de ondergrond overdragen. Lange levensduur door middennoppen met een groot volume.
vibration dampingnatural cork content provides comfortable gripreusable thanks to silicone backinggood elasticityThe cork bar tape gives a good comfortable grip feeling while simultaneously being pressure-dampening thanks to its natural content of cork. A special silicone coating on the bottom provides a good grip on the bar without leaving annoying marks. The CUBE cork bar tape can be used multiple times. Good elasticity makes fitting easy. Combine this bar tape with the CUBE Natural Fit Gel Pads for maximum comfort.SpecificationsColour: greenMaterial: EVA, cork, siliconeSize: (BxL) 30 x 2000 mmWeight: 72 g
Made of 6061-T6 aluminum, the RFR Riser handlebar has a great balance between durability and weight. The slight bar elevation gives a relaxed riding position.Features:slightly elevated curved bar, suitable for trekking bikes, size (D x L x Rise x Angle): 25.4 x 640 mm x 20 mm x 5 degrees, material: aluminium 6061, weight: 278 g
3D-forged aluminiumadjustable stem -10° to 70°total adjustment range 90°four-point clampMade of 3D forged aluminum 6061-T6, which stands for maximum stability and excellent weight. All of those who don't want to choose a single riding style and the corresponding seated position can make use of the heightened adjustability from -10° to 70 ° and thus adjust their individual riding position.SpecificationsColour: blackMaterial: Aluminium 6061Weight: 308 g
The CNC machined aluminum saddle clamp is ultra light and offers maximum stability.Features:super light, 6061-T6 aluminium seat clamp, CNC machined, SIZE (D) 31.8 mm, material: aluminium 6061, weight: 11 g
DE ULTIEME GRAVITY BAND. Onbetwist de favoriet van alle Schwalbe Downhill- en Enduro-atleten. Perfecte allround-eigenschappen voor bijna alle ondergronden en condities. Het geraffineerde intermediaite profiel wordt gecombineerd met de beste compounds en constructie en verlegt daarmee de grenzen tot ongekende hoogte. Sterke schoudernoppen en een agressief, open profieldesign zorgen voor maximale remtractie en grip in bochten, zelfs op hele modderige ondergronden. Met de voor Magic Mary ontwikkelde V-Groves, heeft iedere nop nog meer vertanding met de ondergrond, voor nog meer grip. Schuine vlakke noppen in het centrum van het loopvlak optimaliseren het rijgedrag.
